~ Scope Art ~
~~~Before~~~
~~~After~~~
Below is the code used to make the above picture.
I worked from the top down.
I used <<>spacer type="vertical" size="105"> to move the top audio scope down.
I then used <<>spacer type="horizontal" size="80"> to push
the scope over to the right where it is now.
The first scope would be the small point on the left hand side top.
(There are 3 scopes in the first line.
I then followed the scope with another spacer
<<>spacer type="horizontal" size="85"> and added a second scope.
That gave me a gap to let the bank show.
As you make this type of art you will be putting the scopes
in one line at a time.
When you have the first line finished you would put in
a <<>BR> tag to start a new line.
It really gets easier as you change the numbers
and get the feel of how things move with different numbers.
You will need to adjust the width of the scope and the
spacer to place the scope and align it to the location you like.